“I use can-drill the most as I often encounter competent or semi-fractured formations. it carries its weight by lifting cuttings and keeping the hole stable”
-Derek McDriller
CAN-DRILL is a very high molecular weight powder polymer formulated to quickly increase the viscosity of your drilling fluid. This assists with the removal of cuttings by creating a high viscosity environment down the hole, while simultaneously acting as a powerful hole stabilizer.
CAN-DRILL should be premixed with CAN-LUBE before introducing it to the water tank to create a high viscosity mud system. CAN-DRILL can be added to all products to be used as a viscosifier where more viscosity is required.
BASED ON A 1,000 LT MIXING TANK
Pour 1 liter of CAN-LUBE into an empty container.
Add 1 liter of CAN-DRILL to the CAN-LUBE and premix well. Add more CAN-DRILL if more viscosity is required.
Add the premixed combination of CAN-LUBE and polymer to your mixing tank, then add 0.5 – 1 liter of
CAN-CLAY to the mix if needed. Finish filling with water while continuing to mix. For best results, mix for
10 Minutes if possible, this should result in a viscosity of 40-45 seconds.
1018 7th street S.W.
High River, AB, T1V 1A9
Canada
shipping address
450183 – 82nd Street E., Building #D, Bays 4,5,6,
Aldersyde, Alberta T0L 0A0
CANADA
© 2025 All Rights Reserved.
